Settings and Measurement
3-35
(5)-6 Background Color
Sets the background color of the waveform and digital display areas.
(5)-7 Start/Stop Confirmation Message
Specifies the setting of the confirmation message displayed when data capture is started and
stopped.
(5)-8 Date/Time
Sets the clock of the GL900.
Sets the built-in clock (Date/Time) of the GL900. If Network Time is set, the clock of the GL900 is
automatically adjusted via the network. For details, see "Network Time Settings" on the next page.
(5)-9 Language
Sets the GL900's display language.
(5)-10 Demo Waveform Mode
Displays demo waveforms without analog signal input.
(5)-11 Return to Default Settings
Initializes the settings. After initialization, the settings are reset to the factory defaults.
(5)-12 Game
Six games are available. The score is stored for each user.
(5)-13 Information
Displays system information for the GL900.
Selection Description
On Enables the confirmation message. Pressing the Start/Stop key brings up the message, confirming
whether you want to start (or stop) data capture. Pressing the
Off Disables the confirmation message. Pressing the Start/Stop key immediately starts (or stops) data
capture without displaying the message.
Selection Description
Off Do not display demo waveforms.
On Display demo waveforms.
To Next Page
Loading...
