Settings and Measurement
3-45
(9)-13 Execute X-Y for All Data
Converts all the replay data to X-Y display when executed.
(9)-14 Execute X-Y between Cursors
Converts only the data between Cursors A and B to X-Y display when executed.
(10) NAVI Menu
The NAVI menu can be displayed in three modes, Free Running, Recording, and Replay.
(11) Quick Settings
Operation Description
Open Press the NAVI key to open the NAVI menu.
Close Press the NAVI key to close the NAVI menu.
Browse explanation Explanation is displayed when an enabled key is pressed.
Setting Selections available
X-ch Sets a channel to be assigned to the X-axis in each zone.
Y-ch Sets a channel to be assigned to the Y-axis in each zone.
Trace Turns on or off the display in each zone.
On : Turns on the display of waveforms.
Off : Turns off the display of waveforms in this zone.
To Next Page
Loading...
