96
Specifications
Kahuna 9600, Kahuna 6400 Mainframe Specifications
Mainframe Output Fin Formats & Levels
(Optional) UHDO
12Gbps
Output Fin
4x UHD BNCs SMPTE ST 2082-10
4x SFP + complaint cages
11.88Gbps Video Standards (UHD)
SDI Output
Format
Tri Standard 3Gbps-SDI/HD-SDI/SD-SDI Grouped in 16 off. SD/HD/1080p
(270Mbps / 1.485Gbps / 2.97Gbps)
Analogue Sync ±300mV tri-level HD sync or 300mV SD sync according to system standard
Output
Impedance:
75 ohms
FDO Fiber Fin
Module
Requirements
Output Fiber Optic SFP Module - Single Mode Dual Tx Module (1310nM)
Wavelength = 1310nM (+/- 30nM)
Power = -2dBm typical, -5dBm min, 0dBm max
Note: All single mode TX modules are Class 1 laser products. They comply with
IEC-60825 and FDA 21 CFR 1040.10 and 1040.11.
Output Coax SFP Module - Dual Tx Coax, Mini BNC Module
40GbE IPO40 (IP
Output)
Signals supported over RTP stream per output Fin Module with 2 x 40GbE QSFP
Cages. SFP + Optical 2 x 40G Ethernet
Conforms to IEEE 802.3ba – 40Gigabit over fiber.
SFP + connected Cable 2 x 40Gigabit
Ethernet over twin axial cables
50GbE IPO50 (IP
Output)
Signals supported over RTP stream per output Fin Module with 2 x 50GbE QSFP
Cages. SFP + Optical 2 x 50G Ethernet
Conforms to IEEE 802.3ba – 50Gigabit over fiber.
SFP + connected Cable 2 x 50Gigabit
Ethernet over twin axial cables
UHDO 12Gbps
Output Fin
11.88Gbps Video Standards (UHD)
3840 x 2160p 50Hz, 3840 x 2160p 59.94Hz, 3840 x 2160p 60Hz, 11.88Gbps Video
Signals (UHD) >= 70m of Belden 1694A cable
Mainframe Network Fin (per Fin)
Network 8 ports 10/100/1000 base T, Auto – MDX/MDXI on RJ45 connector.
Serial Control 12 x RS-422 on 9-way D-type.
USB 2x USB2 - for external memory device or hard drive
eSATA 1x eSATA - for external hard drives
Mainframe Reference Fin (per Fin)
Sync Output 2x Tri-Level depending on output standard
Reference Inputs
Mainframe
On-line Switchable between analogue 3Gbps, HD Tri-level Sync and analogue
SD sync 2 x BNC loop-through.
GPO (Tally)
outputs
Mainframe
1 x 25 Way D-type GPO Tally on each Input Fin with isolated contact closures.
GPI inputs
Mainframe
48 TTL-level/contact-closure inputs on 2 x 25-way D-types
To Next Page
Loading...
