GRASS VALLEY KAHUNA 9600 - Page 30

12
Product Information
Kahuna Maverik Order Codes
The Blanking Modules fill the spaces in the control surface where MAV modules are not
required, their function is aesthetic.
Note: The widths of the blanking modules are in 20 mm (0.78 inch)
increments, the smallest is 20mm (0.78 inch) up to 220 mm (8.66 inches).
Blanking Module Ordering Information
Part Number Description
MAV-BP 20 Maverik Module Blank 20mm
Wide GV
MAV-BP 40 Maverik Module Blank 40mm
Wide GV
MAV-BP 60 Maverik Module Blank 60mm
Wide GV
MAV-BP 80 Maverik Module Blank 80mm
Wide GV
MAV-BP 100 Maverik Module Blank 100mm
Wide GV
MAV-BP 120 Maverik Module Blank 120mm
Wide GV