LAN and Com Bus Connections
Planning and Installation Manual 159
NR-33000 (Broadlinx) Board Configuration
Any use of the NIC (LAN) connector, whether for control or for moni-
toring, will require configuration of the NR-33000 board:
• To configure the board using Broadlinx web pages, refer to
Section 4-Broadlinx on page 161.
• To configure the board using the Grass Valley NetConfig appli-
cation, refer to the NetConfig Instruction Manual, part no. 071
8190 xx.
If SNMP/NetCentral monitoring is to be used, the Trinix SNMP agent
residing on the NR-33000 board must be enabled (i.e., licensed). For
more information, see SNMP/NetCentral Monitoring on page 23.
To Next Page
Loading...
Need help?
General
