Broadlinx
166 Planning and Installation Manual
11. If you change the Broadlinx board to another network you will lose
the connection at this point.
12. If more than one Broadlinx board has been supplied for this frame,
re-seat the secondary board at this time and wait for the board to
boot up. Repeat the above procedure starting with Step 6 on
page 163.
Software Installation
Broadlinx boards are shipped with all current Trinix software installed.
For upgrade information, refer to the Field Engineering Bulletin sup-
plied with the software.
SNMP/NetCentral Monitoring
For a brief description of SNMP/NetCentral monitoring, see page 22.
Broadlinx / Internet Explorer Monitoring
Normal Connection Procedure Following Network Address
Configuration
1. Launch Internet Explorer.
The PC used in connection with Broadlinx monitoring requires
Microsoft Internet Explorer 5.0 or newer; version 6 or newer is rec-
ommended for best performance.
2. Enter the URL for the Broadlinx board installed in the system to be
monitored.
3. When connection is established, you will see the Broadlinx top-
level web page (similar to the following):
To Next Page
Loading...
Need help?
General
