GRAUPNER MZ-10 HOTT User Manual

9 / 48
S1042_sh_V1
For your safety by handling the transmitter and the receiver
!
WARNING
Also while programming the transmitter, make sure that a motor
connected in the model cannot accidentally start. Disconnect the
fuel supply or drive battery beforehand.
!
CAUTION
Avoid every kind of short-circuit in all sockets of the transmitter
and of the receiver! Risk of fire! Use only the suitable connectors.
In no case the electronic component of the transmitter or of the
receiver may be changed or modified. Any interference will void
the authorization.
Note
During transport protect the model and the transmitter from dam-
ages.
For your safety by handling the batteries
!
CAUTION
• Protect the batteries from dust, moisture, heath and vibra-
tions. Only use in dry locations.
• Do not use any damaged battery.
• Batteries may not be heated, burned, short-circuited.
• If handled improperly, there is a danger of fire, explosion, irri-
tation and burns.
• Leaked electrolyte is caustic and should not be touched or
come into contact with your eyes. In case of emergency, rinse
with a large quantity of water and consult a Med. Doctor.
• Do not try to recharge the batteries included in the package!
Those are non-rechargeable batteries.
• Stock the batteries in dry and fresh conditions.
• Dispose of the battery in the proper disposal centers.

GRAUPNER MZ-10 HOTT Specifications

General

Modulation	FHSS
Proper use	Airplane, Aircraft
Product type	Remote control
Product color	Black
Antenna length	120 mm
Frequency band	2.4 - 2.4835 GHz
Menu languages	German
Channels quantity	5 channels
Brand compatibility	Any brand
Number of memory records	1
Maximum operating distance	4000 m
Manual	Yes
Operating temperature (T-T)	-10 - 55 °C
Battery type	AA
Number of batteries supported	4
Built-in display	No

Weight and Dimensions

Depth	184 mm
Width	259 mm
Height	96 mm
Weight	630 g