GRAUPNER MZ-10 HOTT User Manual

34 / 48
S1042_sh_V1
Servo direction and model type
Servo direction
With the exception of CH5 for the 2AILE model type, the direction of
rotation can be set separately for each of the servo 1 ... 5 as described
below under "Programming step-by-step".
In the "REVERSE" line of the LED field, the direction of rotation is indi-
cated separately for each of the channels 1 ... 5:
Red LED blinking = Direction "normal",
Red LED solid on = Direction "reverse".
The LED indicator lights for about 5 seconds after exiting the selec-
tion menu so as every transmitter switching on.
Note
Through the available optional SMART BOX the servo can be indi-
vidually adapted to the model necessity in the RX SERVO menu in
the receiver.
Model Type
In the mz-10 HoTT transmitter you can select one of the standard
configurations. The setting is carried out as described below under
"Programming step-by-step".
"Normal"
Elevator and rudder so as aileron if available are operated by only
one servo each. All the five control functions of the mz-10 HoTT
transmitter act separately on the servos connected to the receiver.

GRAUPNER MZ-10 HOTT Specifications

General

Modulation	FHSS
Proper use	Airplane, Aircraft
Product type	Remote control
Product color	Black
Antenna length	120 mm
Frequency band	2.4 - 2.4835 GHz
Menu languages	German
Channels quantity	5 channels
Brand compatibility	Any brand
Number of memory records	1
Maximum operating distance	4000 m
Manual	Yes
Operating temperature (T-T)	-10 - 55 °C
Battery type	AA
Number of batteries supported	4
Built-in display	No

Weight and Dimensions

Depth	184 mm
Width	259 mm
Height	96 mm
Weight	630 g