2 - 7
2.10 CLEAN UNIT
Brush grass, dirt and debris off of unit with a soft brush.
Clean packed grass out from under mower deck. Apply
paint or oil to exposed, bare metal surfaces to prevent
rust.
Inspect unit for visible signs of wear, breakage, or
damage. Order any parts required and make
necessary repairs to avoid delays when beginning use
again.
IMPORTANT: Never spray unit with water or store unit
outdoors.
Clean seat regularly, using a vinyl cleaner (not solvent).
Extreme temperatures can damage seat when left
unprotected against weather. If seat should tear, apply
vinyl repair tape to protect damaged area.
Transaxle cooling fins must be kept clean to prevent
damage from overheating. Use a cloth or brush to
remove grass, chaff and debris.
Unless there are indications of leakage, transaxle does
not have to be checked for proper oil level. If leak
occurs, have it repaired by your Gravely Dealer.
To Next Page
Loading...
