NOTICETECHNIQUEGAMMEM40
M40RANGETECHNICALMANUAL
Date:June2009From
AftersalesTechnicalSupport
Ref.M40GB/FF‐Vers.1.0
Page - 83
Put back the housing red pointer in its support and make sure that it is placed
in the slide correctly.
Replacer le carter du pointeur rouge en vous assurant qu’il soit correctement
placé dans la glissière.
Put back the red pointer housing by the 4 screws.
Repositionner les 4 vis du carter pointeur rouge.
This operation is finished,
Check the red pointer position see chapter M40-A01
Opération terminée,
Contrôler la position du pointeur rouge, voir chapitre M40-A01