Grecom PSR-410 - Page 102

102
Tag
A l p h a - n u m e r i c
text
The alphanumeric display name for
the SRVC search. Use the standard
text entry method or QTXT to name
the object.
L/Out On or Off
Permanent lockout for the SRVC ob-
ject. Also accessed by pressing FUNC
L/OUT while the scanner is stopped
on the SRVC object.
LED Mode Solid or Flash
Controls whether the ALERT LED
flashes or remains on solid when the
ALERT LED is used.
LED Color 0-7
Sets LED color to 0-7 as defined in the
GLOB menu. By default, 0=LED Off,
1=Red, 2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
Latch LED On or Off
Normally the ALERT LED is active only
while the object is receiving a trans-
mission. When Latch is on, the ALERT
LED will remain lit after the transmis-
sion is complete, unless overridden by
a subsequent object that is also using
the ALERT LED.
Backlight On, Off or Flash
Controls whether the backlight should
be on, off or flashing while the object
is active.
Alarm
None, Chirp, Hi-
Lo, Alert, Ring,
2-Chirp, Fast Hi-
Lo, DTMF#
Sets the Audible Alarm for the SRVC
object. When an Audible Alarm is
selected, the selected alarm will play
anytime the scanner stops for activity
on the SRVC object while scanning.
Fav Yes or No
When Yes, the SRVC object is a mem-
ber of the Favorites Scan List.
EXPERT BELOW
Modulation AM, FM, Auto
Modulation setting for the SRVC
search. In most cases Auto will work
fine. Use AM to override and force AM
modulation, FM to force FM modula-
tion.