Grecom PSR-410 - Finding Stored Objects Easily

52
When Scan Lists 1, 2, 3 and 16 are enabled, the display will appear as
follows while scanning:
To toggle a Scan List's status from the Global Settings menu, press PROG
to enter Program Mode, then press the
GLOB
softkey. At the
Scan
Lists:
item, press the SEL key on the 5-way pushbutton pad. Scroll
to the Scan List you wish to change and press the SEL key again, then at
the
Enabled:
setting press the
3
or
4
on the 5-way pushbutton pad
to toggle the Scan List on or off. An asterisk (*) indicates that the Scan List
is enabled. Press the
SAVE
softkey to save settings for that Scan List,
then press
SAVE
again to confirm your global changes and exit the GLOB
menu.
If you inadvertently store an object with no Scan List mappings, the object
will be placed in a special “NS” Scan List that can be accessed using the
34
keys while in Manual Mode or Program mode. Once you scroll to the
NS Scan List, you can use the
56
keys to scroll to the objects found there
and edit the Scan List setting by pressing the PROG key, then the
EDIT
and
CURR
softkeys to see the object's menu.
Finding Stored Objects Easily
The PSR-410's browse feature makes it easy to scroll to the Scan Lists and
Scannable Objects you have created, using the
3456
keys on the 5-way
pushbutton pad while the scanner is in Program or Manual Mode. Here are
some more methods you can use to find stored objects quickly.
Searching For Objects Using FIND
Your PSR-410 provides a very useful FIND feature that allows you to
search for locked out objects, or for objects that contain a text string that
you specify. In text searches, FIND searches for your specified text in the
following places:
• In TGRP objects, the ID field and the Tag field
• In CONV objects, the Frequency field and the Tag field
• In TSYS, LMIT, SRVC and SWPR objects, the Tag field