80
A few common QuickText words are provided for your convenience. You
can keep these, edit them to your preferences, or replace them with your
own custom QuickText words.
QuickText can be used while editing any alphanumeric text field. To insert a
stored QuickText item, while editing an alphanumeric text field use the
34
keys to position the cursor where you what the QuickText inserted, then
press the
QTXT
softkey. The top row of the display will show the available
QuickText phrases. Use the
56
keys to scroll through the stored QuickText
phrases, and press SEL to insert the QuickText phrase at the cursor
location. As a shortcut, you may press the number key on the numeric
keypad that corresponds with the QuickText item you wish to use, instead
of scrolling and pressing SEL.
Customizing QuickText
To edit the QuickText words, press PROG, then the
GLOB
softkey. Scroll
down to the QTXT section using the
6
key on the 5-way pushbutton
pad and find the QTXT storage location that you wish to change. Press
the
4
key to edit the QTXT entry. Use the standard text entry method to
enter your desired text. When you use your QTXT entry in a text field, any
unused spaces will be filled with space characters. If you want to leave
room for additional text after the QTXT is loaded into a text field, include a
space after your text, then a dollar sign ($). This will place one space after
your QTXT when you use your QTXT in a text field, and the edit cursor will
be positioned just after that space where you can continue appending
text in the text field before you save it. For example, if you use the entry
SHERIFF
in the QTXT storage location, your text entry field will look like
this after you load the QTXT “SHERIFF”:
SHERIFF
←
note that cursor is positioned at end of text field
If you use the entry SHERIFF $ in the QTXT storage location, your text entry
field will look like this after you load the QTXT “SHERIFF”:
SHERIFF
←
note that cursor is positioned at end of the word
Once you are finished editing your QTXT storage location, press the
SAVE
softkey to save the QTXT, then press the
SAVE
softkey again to save the
changes you made to the GLOB menu.
Power-On Configuration Key Sequences
Your PSR-410 features power-on keypress sequences that are used as
shortcuts to configuration items, like attenuator settings, backlight settings
To Next Page
Loading...
