97
Threshold Hi 1-99
Available when Multi-Site is set to
ROAM. Sets the control channel de-
code % threshold for a site to be con-
sidered good when looking for a new
site.
Threshold Lo 1-99
Available when Multi-Site is set to
ROAM. Sets the control channel de-
code % threshold for a site to be con-
sidered out of range, which will begin
the process of looking for a new site.
Check All CC Yes or No Available when Multi-Site is set to Stat.
T Tables
Default, Splinter,
Custom
For Motorola systems only - sets cus-
tom channel tables. Use
34
,to select
option, press SEL on Custom to enter
custom table information
Fleet Map
Ty p e I I , E 1 P 1 ,
E 1 P 2 , E 1 P 3 ,
E 1 P 4 , E 1 P 5 ,
E 1 P 6 , E 1 P 7 ,
E 1 P 8 , E 1 P 9 ,
E 1 P 1 0 E 1 P 1 1 ,
E1P12, E1P13,
E1P14, E1P15,
E1P16, CUATOM
For Motorola Type I systems only -
sets fleet map
AutoMove HRs On or Off
For LTR systems only – sets Home Re-
peater AutoMove
LMIT Menu Reference
The LMIT menu is used when creating new Limit Search objects, or editing
existing Limit Search objects. All menus are shown in the scanner's display
as a three line window that can be scrolled up or down to access the
various different parameters. The active parameter is always the middle
parameter and is indicated by a flashing “
:
”. The entire LMIT menu is
shown below:
To Next Page
Loading...
