85
Care
Keep the scanner dry and away from water; do not wash the scanner with
a wet cloth or pour fluid into the scanner. Use and store the scanner only
in normal temperature environments. Handle the scanner carefully; do not
drop it. Keep the scanner away from dust and dirt, and wipe it with a damp
cloth occasionally to keep it looking new. No object filled with liquids, such
as vases, shall be placed on the apparatus.
Modifying or tampering with the scanner’s internal components can
cause a malfunction and might invalidate its warranty and void your FCC
authorization to operate it.
The radio design of the tuning, control and filtering circuitry on the
receiver is controlled by the serial data from the firmware code in the
microprocessor, which is built-in by the microprocessor manufacture as a
part of the internal design of the processor. Since the processor information
is inaccessible to the user, if someone attempt modifying circuitly without
the knowledge of the firmware code, the radio simply will fail to operate.
In Case of Fault
If you believe your scanner is defective, you should contact your dealer for
assistance. However, before you do so, check that the fault was caused by
a human error. Carefully reread the relevant section in the Owners Manual.
To Next Page
Loading...
