93
TGRP Menu Reference
The TGRP menu is used when creating new Trunking Talkgroup objects,
or editing existing Trunking Talkgroup objects. All menus are shown in the
scanner's display as a three line window that can be scrolled up or down to
access the various different parameters. The active parameter is always the
middle parameter and is indicated by a flashing “
:
”. The entire TGRP menu
is shown below:
TGRP Parameter Options Description
Scan Lists
On or Off for Scan
Lists 1-22
Sets membership in Scan Lists. Use
34
keys to scroll through Scan Lists.
Use SEL key to toggle Scan List mem-
bership. A “
*
” next to the Scan List
number indicates that the object is
mapped to that Scan List.
TSYS
New or previously
stored trunking
s y s t e m o b j e c t
(TSYS)
To enter a new trunking system, use
the
3 4
keys to scroll through the
stored systems until
NEW
appears,
then press SEL to enter the parame-
ters for the new TSYS. To use a trunk-
ing system that you have previously
entered, use the
34
keys to scroll to
the desired system.
ID
D e c i m a l , h e x ,
AFS, or Wildcard
d e p e n d i n g o n
TSYS type
The digital address of the talkgroup
or individual radio ID on the trunked
radio system.
Type Group or Private
Use Group for talkgroup ID, Private for
individual radio ID.
Tag
A l p h a - n u m e r i c
text
The alphanumeric display name for
the TGRP. Use the standard text entry
method or QTXT to name the object.
L/Out On or Off
Permanent lockout for the TGRP. Also
accessed by pressing FUNC L/OUT
while the scanner is stopped on the
TGRP object.
Priority On or Off
Turns Priority Mode on or off for the
TGRP object.
To Next Page
Loading...
