95
Hit Count Numeric value
Increments each time a transmission
is received on the SWPR object. Glob-
al “Hit Counts” must be set to ON.
Press the
Dflt
softkey to reset to 0.
TSYS Menu Reference
The TSYS menu is used when creating new Trunking System objects,
or editing existing Trunking System objects. All menus are shown in the
scanner's display as a three line window that can be scrolled up or down to
access the various different parameters. The active parameter is always the
middle parameter and is indicated by a flashing “
:
”. The entire TSYS menu
is shown below:
TSYS Parameter Options Description
Type
M O T 8 0 0 / 9 0 0 ,
MOT VHF/UHF,
E D A C S S T D ,
EDACS NAROW,
LTR
S e t s t h e tr u n k i n g s y s t e m ty p e .
Choose MOT800/900 if the system is
a Motorola 800 or 900 MHz analog
trunked radio system that uses the
3600 baud control channel. Use
EDACS STD for most 800 MHz EDACS
systems using the 9600 BPS EDACS
control channel. Use EDACS NAROW
for most 900 MHz and some VHF/UHF
EDACS systems using the 4800 BPS
EDACS control channel. Use LTR for
Logic Trunked Radio (LTR) systems.
Tag
Alpha-numeric
text
The alphanumeric display name for
the TSYS. Use the standard text entry
method or QTXT to name the object.
Frequencies SEL
Press SEL to enter trunked radio
system frequencies. Enter control
channel frequencies in any order for
all Motorola trunking systems. Enter
system frequencies in LCN order for
all EDACS trunking systems. Enter
system frequencies in Home Repeater
order for LTR systems.
L/Out On or Off
Permanent lockout for the TSYS. When
On, no traffic will be received on any
programmed TGRPs for this TSYS.
To Next Page
Loading...
