17
Understanding the Display Icons
Your PSR-410 features a high contrast, white backlit LCD Display to
provide important information about the status of the radio while you are
programming and using it. The LCD includes a row of icons at the top that
provides information about the status of the scanner while it is operating.
Beneath this row of icons, there are 4 rows of 16 characters each that
provide alphanumeric information for frequencies, object names, Scan List
status and menu information. Figure 4 provides an example of the display
that is shown while the radio is scanning.
Figure 4 - Scanning Display
The top row of icons are defined as follows:
The Function Key (FUNC) has been pressed. FUNC acts as a “shift”
key and typically enhances in some way the action of the button that
follows it. When using FUNC, press the FUNC key first and release it,
then press the next key.
The scanner is currently receiving trunking control channel data.
The attenuator is set for Global mode.
The attenuator is currently active.
The radio's squelch circuit is open.
Signal meter indicating strength of the received signal.
Menu position and search direction indicators.
To Next Page
Loading...
