51
5
: navigates “up” through the objects assigned to the current Scan List
6
: navigates “down” through the objects assigned to the current Scan List
4
: navigates “up” through the active Scan Lists in the radio
3
: navigates “down” through the active Scan Lists in the radio
Scroll down in the object's parameters menu to the
Scan Lists:
field. With the
Scan Lists:
field highlighted, use the
4
on the 5-way
pushbutton pad to scroll through the Scan Lists, and use the SEL button
to toggle membership for a Scan List on or off. The asterisk (*) next to the
Scan List number indicates that the object is a member of that Scan List.
Press the
Save
softkey to save the modified object.
Naming, enabling and disabling Scan Lists
By default, Scan Lists are named “Scan List 01 - Scan List 20”. If desired,
you can give your Scan Lists names to describe their function. Press PROG,
then press the
GLOB
softkey and scroll down to the Scan Lists parameter.
Press the SEL key to display the Scan Lists sub menu. Scroll to the desired
Scan List and press the
4
key to edit the settings for the selected Scan
List, Scroll to the
Tag
field and press the
4
key to edit the name. Press
the
Done
softkey when finished, then press the
Save
softkey to save the
changes to the Scan List sub menu, then press the
Save
softkey again
to save the changes to the Global menu. Scan Lists may be enabled or
disabled while actively scanning, or by accessing the individual Scan List in
the Global Settings (GLOB) menu.
To toggle a Scan List's enabled/disabled status while scanning, press the
numeric key that corresponds with the Scan List you wish to toggle. For
example, pressing 4 while scanning will toggle the state of Scan List 04
from enabled to disabled, or vice versa if the Scan List is already disabled.
To toggle the enabled/disabled status for Scan Lists 11-20, press FUNC,
then press a number key, i.e., press FUNC 3 to toggle the status of Scan
List 13. If you enable a Scan List that has no assigned objects, the number
for that Scan List will flash in the display while the scanner is scanning.
When you enable a Scan List, the display briefly shows the name of the
Scan List on Line 4 of the display, and the word ON or OFF at the end of
Line 3 to indicate if the Scan List was toggled on (enabled) or off (disabled).
To Next Page
Loading...
