61
Press the PRI key when the scanner stops on the object while it is active.
The
plD
indicator in the object display will show
p
for Object Priority Off,
and
P
for Object Priority On.
Browse to an object in Manual Mode or Program mode, then press the
PRI key to toggle Object Priority on or off. The
plD
indicator in the object
display will show
p
for Object Priority Off, and
P
for Object Priority On.
Browse to an object in Program mode. Press the
EDIT
, then
CURR
softkeys. Use the
6
key to scroll to the Priority setting. Use the
3
or
4
keys to toggle Priority On or Off.
When creating a new object, before saving the object scroll to the Priority
setting. Use the
3
or
4
keys to toggle Priority On or Off.
Turning Priority Scan Mode On or Off
While the radio is scanning, press FUNC, then PRI to toggle Priority Scan
On or Off. Priority Scan status is shown in the man Scanning status display.
PRI
indicates that Priority Scan mode is on, and
pri
indicates that
Priority Scan mode is off.
CONV Priority Scan
When Object Priority is set to Yes for one or more CONV objects, the
scanner will sample the CONV objects for activity periodically while
scanning and monitoring other objects.
This sampling will cause a brief muting of received audio when it occurs
while another object is active.
The more CONV objects are set for Priority, the longer this audio muting will
be, since it takes a certain amount of time to sample each Priority CONV
object for activity.
TGRP Priority Scan
When Object Priority is set to Yes for one or more TGRP objects, the
scanner will give those TGRPs priority over other TGRPs while checking
a particular trunking system for activity. TGRPs configured for Priority are
checked for activity before any other TGRPs are checked, and during the
reply delay time after non-priority TGRP calls.
Additionally, your PSR-410 decodes the subaudible priority data that is
present on analog Motorola talkgroup calls (3600 baud control channel
systems only), and will switch to a priority talkgroup when the data for that
talkgroup is found in the subaudible priority data.
To Next Page
Loading...
