34
4.5.3 Parameter
Operation Instructions
(1)At the menu page, by touching “PARAMTER”, the controller will access to the parameter
setting page, as shown in the figure below.
Fig 4-6 Parameter Setting Page 1
(2)At the parameter setting page, by touching the last page and next page icons, the desired
setting page can be selected.
Fig 4-7 Parameter Setting Page 2
(3)By touching the desired parameter, the controller will access to the corresponding setting
pages as shown in the figure below. After that, by touching “OK”, this setting will be saved
A Series Modular-type Air-cooled (Heat Pump) Chiller
To Next Page
Loading...
