24
(2)Press “OK” and then the control panel will access to the following “ON” page.
(3)At the homepage and menu page when the unit is “ON”, by touching “ON/OFF”, the
control panel will access to the following page.
(4)Press “OK” and then the control panel will access to the following “OFF” page.
[Notes]
Upon first power-on, the On/Off status will not be memorized. However, once“ON/OFF
memory”is set to“ON”at the function setting page the On/Off status will be memorized upon
next power-on. When“ON/OFF memory”is set to “No”, the control panel will keep OFF status
upon next each power-on, as shown in the figure above.
4.5.2 Functions
Operation Instructions
A Series Modular-type Air-cooled (Heat Pump) Chiller