47
2) When touching “No” or “Cancel”, this operation will quit and the unit will do not do any
operation.
3) After this operation, all recovered errors for all on-line units will be cleared; for those
unrecovered, there will still be alerts.
(2)Unlock Discharge Failure
Operation Instructions
At the “ERROR CLEAR“ page, by touching “Unlock discharge failure”, the control panel
will access to the page as shown below. Then, by selecting “Yes” and “OK”, the discharge
failure will be unlocked; or by selecting “Cancel”, this operation will quit and go back to the
“ERROR CLEAR” page.
[Notes]
When the error of discharge failure has been eliminated, this setting can unlock the
discharge failure and the corresponding locked unit can be restarted.
4.5.6 General
Operation Instructions
At the function setting page, by touching “GENERAL”, the control panel will go to the
corresponding setting page, where system clock, key tone and backlight and other general
functions can be set, as shown in the figure below.
Fig 4-17 General Page 1
A Series Modular-type Air-cooled (Heat Pump) Chiller
To Next Page
Loading...
