55
Remote
monitoring kit
FG30-00/A(M)
MC200027
It is for remote monitoring
other than BMS.
Other main parts:
monitoring software disc,
optoelectronic isolated
converter
S
Communication
patching board
CF159 LN01201090
It is required when several
units forms a network. It is
intended to connect two or
three communication lines..
Other main parts:
communication patching
board (with fixed support),
connection line
P
S= Standard O= Optional P= Purchased by users
Notes
(1)When distance between the output of the BMS system or the output of the optoelectronic
converter to CN4 of the display panel exceeds 800m, an optoelectronic repeater is re-
quired to reinforce signals.
(2)The optoelectronic repeater is also required between the CN5 of the display panel and
the main board for extending the communication distance.
4.6.4 Model Selection Instructions
4.6.4.1
Rules for Model Selection
4.6.4.1.1
Supply Scope
Item Model
Type
Remarks
Computer
\ O
CPU：Pentium 4 or
above
Memory：512M or
above
Hard disc：30G or
above
Serial port: 1 at least
Opertion system：
Windows XP/
Windows 2003/
Windows Vista/
Windows 7
A Series Modular-type Air-cooled (Heat Pump) Chiller
To Next Page
Loading...
