71
5.4.4 Installation and Service Space
The interval between each single unit should be larger than 0.5m so that there is enough
space for entering air and maintenance. The distance between the unit and any barrier should
be or larger than 1m so as to keep good ventilation around the unit. If possible, a suncover can
be set up 3m ahead of the unit.
5.4.5 Installation Foundation
(1)The installation foundation should be designed by qualified designers.
(2)The foundation should be made of cement or steel structure and be capable of supporting
the weight of the unit. Additionally, the upper surface should be kept level. It would be bet-
ter to keep drain grooves around the foundation.
(3)The installation should be secure enough, and its surface should be smooth.
A Series Modular-type Air-cooled (Heat Pump) Chiller
To Next Page
Loading...
Need help?
General
