Water Monitoring System
Ver.5.0.1 – Revision August 2022 Page 17 of 111
SENSOR!
The sensor modules must be connected to the Water Monitor before powering up (risk of
damage). As soon as the system is under voltage, the connection to the sensor modules
must not be interrupted. Therefore, please disconnect the power when you need to connect
or disconnect sensor modules. The equipment must not be exposed to strong mechanical
shocks.
Pressure!
Do not shut-off the pipeline to or from the system when the system is in operation! Damage
of components can occur.
Before removing any wetted components, please depressurize the system.
HARMFUL COMPONENTS!
The water can contain poisonous components that are potential harmful to humans and
animals. Some calibration fluids contain high concentration of harmful components. Risk
of chemical burns can occur. Protection must be worn whenever the risk of being in contact
with water and/or calibration fluids can occur.
Please consult MSDS for further information.
RECYCLING!
Please do not dispose the
equipment with regular disposal. Disposal should be in
accordance with the requirements of the current statutory regulations.
Symbol identification!
The CE mark proves the compliance of
the instrument with the requirements
of the relevant EU directives
To Next Page
Loading...
Need help?
General
