GREEN INSTRUMENTS Maritime G6100 User Manual

Routine Maintenance
Page 50 of 111
8 Routine Maintenance
WARNING/ATTENTION
• To avoid risk of corrosion, always clean up the water spill immediately.
• Do not use sharp or hard tools to clean the lenses. Use the cleaning pads for black
fouling and use a tissue soaked with water to remove salt deposits.
• The PAH and Turbidity sensor modules use UV and IR light. Please do not stare into
the lenses – it can cause damage to your eyes.
Note
The intervals stated below are only general guidelines and must be adjusted based on
specific system experiences. The intervals are based on optimum conditions and
failure to comply with system specifications can impact intervals.
Planned Maintenance Program
Description
If necessary
Weekly
Monthly
Quarterly
Every 6 month
Yearly
Every 2 years
Every 3 years
Every 4 years
Every 5 years
Maintenance Instruction
Number
G6110 PAH sensor
Validation of PAH sensor
x
Calibration of PAH sensor
x
Factory Calibration of PAH
sensor
x
Visual check to see if
cleaning is needed:
• PAH sensor
• PAH measuring chamber
& bushing
x
Cleaning of PAH sensor,
measuring chamber &
bushing
x
Internal Light Source
Replacement at Factory
x

GREEN INSTRUMENTS Maritime G6100 Specifications

General

Brand	GREEN INSTRUMENTS
Model	Maritime G6100
Category	Measuring Instruments
Language	English