Growatt SPH3600 Installation Manual

1.5 Safety Instructions
1. Please be clear which kind of battery system you want, lithium battery system or lead-acid battery system,
if you choose the wrong system, SPH can’t work normally.
2. Please read this manual carefully before the installation, the company has the right not to quality
assurance, If not according to the instructions of this manual for installation and cause equipment damage.
3. All the operation and connection please professional electrical or mechanical engineer.
4. During installation, please don’t touch the other parts within the box.
5. All the electrical installation must comply with the local electrical safety standards.
6. If equipments needs to maintain, please contact with local specify system installation and maintenance
personnel.
7. Use the equipment to combined to grid needs to obtain the permission of local power supply
department.
8. When install PV modules in the daytime, please turn off the PV switch, Otherwise it will be dangerous as
high terminal voltage of modules in the sunshine.
2 Safety
2.1 Purpose Use
The system chart of SPH:

Growatt SPH3600 Specifications

General

Model	SPH3600
Type	Hybrid Inverter
Rated Power	3600 W
Max PV Input Voltage	550 V
Number of MPPTs	2
Max Input Current per MPPT	11 A
Nominal DC Voltage	360 V
Nominal AC Power	3600 W
Max AC Current	16 A
Nominal AC Voltage	230 V
AC Voltage Range	180-280V
Nominal Grid Frequency	50/60 Hz
THDi	<3%
Max Efficiency	97.5%
DC Switch	Yes
Protection Degree	IP65
Battery Voltage Range	42 V - 59 V
Communication Interfaces	RS485, WiFi
Max AC Power	3600W
Euro Efficiency	97.0%
Operating Temperature Range	-25°C to +60°C
Cooling	Natural Convection