Growatt SPH5000 Installation Manual

discharging
power
Type of Battery lithium
/Lead-acid
lithium
/Lead-acid
lithium
/Lead-acid
lithium
/Lead-acid
lithium
/Lead-acid
lithium
/Lead-acid
Efficiency
Max. efficiency 97.2% 97.2% 97.3% 97.4% 97.5% 97.6%
Euro weighted
efficiency
97% 97% 97.1% 97.1% 97.2% 97.2%
MPPT efficiency
≥99.5% ≥99.5% ≥99.5% ≥99.5% ≥99.5% ≥99.5%
Protection devices
Safety level Class Il
Overvoltage
category
PV:II AC:III Others:I
Ingress
protection
IP65
Inverter topology Non-isolated
Operating
temperature
range
–25°C ... +60°C (-13...+140℉) with derating above 45°C /113℉
Safety level Class I
Ingress
protection
IP65
DC switch Integrated
DC
reverse-polarity
protection
Integrated
DC Surge
protection
Type II
Insulation
resistance
monitoring
Integrated
AC surge
protection
Type II
AC short-circuit
protection
Integrated
Ground fault
monitoring
Integrated
Grid monitoring Integrated
Anti-islanding
protection
Integrated(Active Frequency Drift)
Residual-current
monitoring unit
Integrated
General Data

Growatt SPH5000 Specifications

General

Model	SPH5000
Type	Hybrid Inverter
Rated Power	5000 W
Max. DC Voltage	550 V
Max. Output Current	22 A
Weight	25 kg
Max. DC Power	6000 W
Start Voltage	150 V
Nominal DC Voltage	360 V
Number of MPP Trackers	2
AC Nominal Power	5000 W
Max. AC Apparent Power	5000 VA
AC Nominal Voltage	230 V
AC Voltage Range	180-280V
Nominal Grid Frequency	50/60Hz
Total Harmonic Distortion (THDi)	<3%
Power Factor Adjustment Range	0.8 leading to 0.8 lagging
DC Injection Current	<0.5% In
Switching Time	<10 ms
Max. Charge/Discharge Power	5000 W
Max. Charge/Discharge Current	100 A
Protection degree	IP65
Max. PV Input Voltage	550 V
Cooling Method	Natural Convection
Communication with BMS	CAN
Operating Temperature Range	-25°C to 60°C
MPPT Voltage Range	120 V - 550 V