19 TAKING SCANNER TO ANOTHER LOCATION
When you pack the scanner in carrying case make sure that objective is in uppermost position and screw
transportation pin to its’ place. During transportation, the scanner should be kept in upright position when possible.
Always verify the operation and performance of the scanner after transportation.
20 PRODUCT AND SAFETY INFORMATION
Keep the scanner dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that
corrode electronic circuits.
Use only dry and clean slides. Drying liquid substances can jam the slide holder mechanism. Spill of liquid on
slide support glass may cause the liquid to leak to internal parts and lead to malfunction.
Do not use or store the scanner in dusty or dirty areas. Use the protective cover when the scanner is not in
use.
Scanner can be stored in temperatures between +1 and +70 degrees of Celsius (34 to 158 Fahrenheit)
without special measures, provided that condensing humidity conditions are not present.
Scanner can be stored in temperatures between -20 and +70 degrees of Celsius (-4 to 158 Fahrenheit) in an
airtight container to prevent the moisture forming inside the device. The container must be opened only
after it has warmed up to normal room temperature (+15 to +25 degrees of Celsius or 59 to 77 Fahrenheit).
Airtight carrying case is available for purchase at Grundium or your distributor.
Use the scanner in temperatures between 15 and 40 degrees Celsius (59 to 104 Fahrenheit).
Do not open the scanner or try to change the objective. Only persons authorized by Grundium may repair
the product. Unauthorized modifications may damage the scanner. Note: Warranty is void if scanner’s seals
are broken.
Do not drop, knock, or shake the scanner. Rough handling can break it or deteriorate its performance.
Only use a soft, clean, dry, lint-free cloth to clean the surface of the scanner. Use only a detergent that suits
microscopes.
Keep the scanner away from magnets or magnetic fields, as they may affect the scanner’s operation. Do not
use this device in close proximity to sources of strong electromagnetic radiation (e.g. unshielded intentional
RF sources), as these can interfere with proper operation.
To Next Page
Loading...