85 kg
Exit
Trainer 30
5. Once the weight relief has been selected, the training
begins by pressing the left menu button ”
”
85 kg
Exit
Trainer 30
6. Automatic weight relief is activated and the training
begins. This is indicated by a yellow display. The user
may now carry out the exercises with their weight
relieved as selected in step 5.
The weight may be adjusted as needed during training
using the up/down arrows on the hand control. Adjust-
ments are done in intervals of 1 kg.
7. For hands-free control, the hand control may be clipped
on to the holder on the strap.
Hands-free control leaves the therapist with both hands
free to help the user during the training and prevents
the cord from being wrapped around the strap, risking
damage. Do not place the hand control on the hanger:
the cord will wrap itself around the strap!
85 kg
Exit
Trainer 30
8. If you wish to terminate the automatic training function
and return to normal “hold to run” mode, activate either
one of the two menu buttons ”
Exit
” below the
display (both buttons may be used).
85 kg
Exit
Trainer 30
9. When the training is over: select “
Exit
” (Exit) to leave
the Trainer Module – the ceiling hoist will now function as
normal (for lifting and transfer).
37
© Guldmann GB/US-02/2021 • # 550216_19
© Guldmann GB/US-02/2021 • # 550216_19
To Next Page
Loading...
