GW Instek GDM-834X Series - Input:impedance:auto; System:display; System:scpi:mode; System:serial

COMMAND OVERVIEW
137
SYSTem:DISPlay
Turns the Display on/off.
Parameter: ON | OFF
Example: SYST:DISP ON
Turns the display on.
SYSTem:DISPlay?
Returns the status of the display
Return parameter: 0|1, 0=OFF, 1=ON
SYSTem:SERial?
Returns the serial number (eight characters/numbers)
SYSTem:SCPi:MODE
Sets the SCPI mode.
Parameter: NORM| COMP
(NORM=Normal, COMP= Compatible to GDM8246)
Example: SYST:SCP:MODE NORM
Sets the SCPI mode to normal.
SYSTem:SCPi:MODE?
Returns the SCPI mode.
Return parameter: NORMAL | COMPATIBLE
INPut:IMPedance:AUTO
Sets the input impedance for DCV mode.
Parameter: ON(10G)|OFF(10M)
Example: INP:IMP:AUTO ON
Turns the Automatic input impedance on.
INPut:IMPedance:AUTO?
Returns the input impedance mode.
Return parameter: <Boolean>(0|1) (0=OFF(10M), 1=ON(10G))
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com