GW Instek GDM-834X Series - Capacitance Measurement

GDM-834X Series User Manual
46
Capacitance Measurement
The capacitance measurement function checks the capacitance of a
component.
Set to Diode
Measurement
1. Press the
/
key twice to activate
capacitance measurement.
Note: pressing the
/
key once will activate
the diode measurement instead.
2. The mode will switch to capacitance mode
immediately, as shown below.
Display
Capacitance
indicator
Capacitance
units
Measurement
range
S
n F
Connection
Connect the test lead between the VΩ
terminal and COM terminal; Positive-V,
Negative-COM. The display updates the
reading.
CAT 600V
COM
250V
W
V
T0.5A
FUSE
INPUT
MAX
500Vpk
12A
MAX
750V
1000V
MAX
0.5A
MAX
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com