GW Instek GDM-834X Series - View Serial Number; View Version Number

SYSTEM/DISPLAY CONFIGURATION
77
View Serial Number
Procedure
1. Press the MENU key.
2. Go to SYSTEM on level 1.
3. Go to S/N on level 2.
4. The serial number will be displayed across both
the primary and secondary display.
Display
Exit
Press the EXIT key twice to go back to the
measurement screen.
View Version Number
Procedure
1. Press the MENU key.
2. Go to SYSTEM on level 1.
3. Go to VER on level 2.
4. The firmware version number will be displayed
in the secondary display.
5. Press Exit to exit from the version menu.
Display
Note
Firmware updates can only be performed by a GW
Instek service technician. F
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com