GW Instek GDM-834X Series - Input Resistance Settings

SYSTEM/DISPLAY CONFIGURATION
79
Input Resistance Settings
The 500mV and 5V DC voltage ranges can be set to an input
resistance of 10MΩ or 10GΩ. This setting is only applicable for DC
voltage.
Range
Input resistance
10MΩ, 10GΩ
Default
10MΩ
Procedure
1. Press the MENU key.
2. Go to MEAS on level 1.
3. Go to INPUT R on level 2.
4. Set the input resistance to 10MΩ or 10GΩ
5. Press the Enter key to confirm.
6. Press the EXIT key to exit from the input
resistance menu.
Display
Input resistance
setting
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com