GW Instek GDM-834X Series - Save to an Existing File (Available Only in Advance Mode)

GDM-834X Series User Manual
92
until the USB store function is turned off.
This setting will appear automatically after the
USB Store function has been started in Advance
mode, see page 97 for details.
Note
When set to CONTINU, the actual number of
reading counts cannot exceed 5000000 (50000
readings X100).
Display
Count setting
Count menu
indicator
Save to an Existing File (Available only in Advance Mode)
Range
FILE:
CONTINU, NEWFILE
Default
NEWFILE
Overview
By default a new file is created each time the
USB STO function is used. The FILE menu
gives you the option to continue saving to the
previous file rather than creating a new file
each time the USB STO function is used.
This setting will appear automatically after the
USB Store function has been started in Advance
mode, see page 97 for details.
Display
File menu
setting
File menu
indicator
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com