GW Instek GDM-834X Series - Compatibility Settings; Changing the Compatibility Setting

SYSTEM/DISPLAY CONFIGURATION
81
Compatibility Settings
Changing the Compatibility Setting
The GDM-8341/8342 can be set to a special compatibility mode that
will allow the unit to emulate the SCPI command syntax of the
GDM-8246 when in remote control mode. For example, this feature
can allow programs that were originally written for the GDM-8246
to run on the GDM-8342/8341 with little modification.
Range
LANG
NORM, COMP
Procedure
1. Press the MENU key.
2. Go to SYSTEM on level 1.
3. Go to LANG on level 2.
4. Set the LANG setting to either NORM (normal
mode) or COMP (compatibility mode).
5. Press the Enter key to confirm.
6. Press the EXIT key to exit from the LANG
menu.
Display
LANG setting
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com