GW Instek GDM-834X Series - Continuity Test

GDM-834X Series User Manual
48
Continuity Test
The continuity test checks that the resistance in the DUT is low
enough to be considered continuous (of a conductive nature).
Procedure
1. Press the Ω/ key twice to activate continuity
testing.
2. The mode will switch to continuity testing
immediately, as shown below.
Display
W
S
Continuity
state
Continuity function
indicator
Connection
Connect the test lead between the VΩ
terminal and COM terminal. The display
updates the reading.
CAT 600V
COM
250V
W
V
T0.5A
FUSE
INPUT
MAX
500Vpk
12A
MAX
750V
1000V
MAX
0.5A
MAX
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com