Users can make detailed settings by themselves
in this mode. Advance mode is more flexible, so
it is comparatively more complex and only
recommended for advanced users. The
following settings are available in this mode:
“Existing File”, “File Name”, “Count”, “Time
Mode”, “Time Setup” and “Date Setup.”
Note that the settings that are available for the
Advance mode are automatically available
when you activate the USB Store function in the
Advance mode. See page 97.
1. Press the MENU key.
2. Go to USBSTO on level 1.
3. Go to MODE on level 2.
4. Set MODE to SIMPLE or ADVANCE.
5. Press the Enter key to confirm.
6. Press the EXIT key to exit from the MODE
menu.
To Next Page
Loading...
