GDM-906X Series User Manual
202
Press the F2 (Cursor1) for checking
the lowest value of each count.
The lowest value of the selected
count with its affiliated serial number.
Press the Knob key to change the
maximum counts for display.
1 pixel – 10 pixels – 20 pixels
The delta between the highest and
lowest values of the selected count
with its affiliated serial number.
Press the F3 (Cursor2) key to check the highest
value of each count. Scroll the Knob key
rightward or leftward to move cursor on
different sections.
Press the F3 (Cursor2) for checking
the highest value of each count.
The highest value of the selected
count with its affiliated serial number.
Press the Knob key to change the
maximum counts for display.
1 pixel – 10 pixels – 20 pixels
The delta between the highest and
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
