GW Instek GDM-9060 - Page 203

DISPLAY SETTING
203
Sect.
lowest values of the selected count
with its affiliated serial number.
F4 key
(COU/T
IM)
COU
Press the F4 (COU/TIM) key to toggle between
the 2 modes (COU/TIM). In association with
the previous F1 (Range), F2 (Cursor1) and F3
(Cursor2) keys, user can utilize COU to check
diversified values of each count per needs
Note
This option is only available when
“Recent” under HScale is selected.
Yellow
Sect.
The display basically is identical with
the previous introductions of F1
(Range), F2 (Cursor1) and F3
(Cursor2) keys. Refer to the each
section for further details.
TIM
Press the F4 (COU/TIM) key to toggle between
the 2 modes (COU/TIM). In association with
the previous F1 (Range), F2 (Cursor1) and F3
(Cursor2) keys, user can utilize TIM to check
time parameters of each count per needs.
Note
This option is only available when
“Recent” under HScale is selected.
w ww. . com
information@itm.com1.800.561.8187