REMOTE CONTROL
297
[SENSe:]VOLTage[:DC]:NULL[:STATe]?
Returns the relative function state of DC Voltage measurement.
Return parameter: 0 | 1, 0=OFF, 1=ON
[SENSe:]VOLTage[:DC]:NULL:VALue
Sets the relative value for DC Voltage measurement.
Parameter: <NRf> (-1200.0~1200.0 V) | MIN | MAX | DEF
Example: SENS:VOLT:DC:NULL:STAT ON
SENS:VOLT:DC:NULL:VAL 1.2
Sets the relative value to 1.2V for DC Voltage measurement.
[SENSe:]VOLTage[:DC]:NULL:VALue?
Returns the current relative value of DC Voltage measurement.
[SENSe:]VOLTage[:DC]:NULL:VALue:AUTO
Sets the relative value auto on/off for DC Voltage measurement.
Parameter: 0 | 1 | ON | OFF
Example: SENS:VOLT:DC:NULL:STAT ON
SENS:VOLT:DC:NULL:VAL:AUTO ON
READ ?
The unit automatically sets the 1st count of measurement as null value.
[SENSe:]VOLTage[:DC]:NULL:VALue:AUTO?
Returns the null value auto state of DC Voltage measurement.
[SENSe:]VOLTage[:DC]:RANGe
Sets the DC voltage measurement range.
Parameter: <NRf> | MIN | MAX | DEF
Example: SENS:VOLT:DC:RANG MIN
Set the DC voltage range to lowest range allowed.
[SENSe:]VOLTage[:DC]:RANGe?
Returns the DC voltage measurement range.
[SENSe:]VOLTage[:DC]:RANGe:AUTO
Sets the DC voltage Auto-range setting on, off or once only.
Parameter: 0 | 1 | ON | OFF | ONCE
Example: SENS:VOLT:DC:RANG:AUTO ON
Turns Auto-range on for DC voltage measurements.
[SENSe:]VOLTage[:DC:]RANGe:AUTO?
Returns the DC voltage Auto-range settings.
Return parameter: 0 | 1, 0=OFF, 1=ON
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
