GW Instek GDM-9060 - Page 299

REMOTE CONTROL
299
[SENSe:]VOLTage:AC:NULL[:STATe]?
Returns the relative function state of AC Voltage measurement.
Return parameter: 0 | 1, 0=OFF, 1=ON
[SENSe:]VOLTage:AC:NULL:VALue
Sets the relative value for AC Voltage measurement.
Parameter: <NRf> (-1200.0~1200.0 V) | MIN | MAX | DEF
Example: SENS:VOLT:AC:NULL:VAL 1
Sets the relative value to 1V for AC Voltage measurement.
[SENSe:]VOLTage:AC:NULL:VALue?
Returns the current relative value of AC Voltage measurement.
[SENSe:]VOLTage:AC:NULL:VALue:AUTO
Sets the relative value auto on/off for AC Voltage measurement.
Parameter: 0 | 1 | ON | OFF
Example: SENS:VOLT:AC:NULL:STAT ON
SENS:VOLT:AC:NULL:VAL:AUTO OFF
READ?
The unit automatically sets the 1st count of measurement as null value.
[SENSe:]VOLTage:AC:NULL:VALue:AUTO?
Returns the null value auto state of AC Voltage measurement.
[SENSe:]VOLTage:AC:RANGe
Sets the AC voltage measurement range.
Parameter: (<NRf> | MIN | MAX | DEF)
Example: SENS:VOLT:AC:RANG MAX
Set the AC voltage range to highest range allowed.
[SENSe:]VOLTage:AC:RANGe?
Returns the AC Voltage measurement range.
[SENSe:]VOLTage:AC:RANGe:AUTO
Sets the AC voltage Auto-range setting on, off or once.
Parameter: 0 | 1 | ON | OFF | ONCE
Example: SENS:VOLT:AC:RANG:AUTO ON
Turns Auto-range on for AC voltage measurements.
[SENSe:]VOLTage:AC:RANGe:AUTO?
Returns the AC voltage Auto-range settings.
Return parameter: 0 | 1, 0=OFF, 1=ON
w ww. . com
information@itm.com1.800.561.8187