GW Instek GOM-804 - Temperature:conversion:display; Temperature:conversion:math:data; Temperature:conversion:resistance

COMMAND OVERVIEW
135
TEMPerature:CONVersion:DISPlay
Set
Query
Description
Sets or returns the temperature display mode for the
temperature conversion function.
Syntax
Query Syntax
TEMPerature:CONVersion:DISPlay <NR1>
TEMPerature:CONVersion:DISPlay?
Parameter/
Return parameter
<NR1>
1:ΔT
2:T
Example
TEMP:CONV:DISP 1
Sets the temperature display mode for the temperature
conversion function is ΔT.
TEMPerature:CONVersion:MATH:DATa
Query
Description
Returns conversion function deviation value.
Query Syntax
TEMPerature:CONVersion:MATH:DATa?
Return parameter
<NR3>
±0.000~9.999E± X
Example
TEMP:CONV:MATH:DAT?
Returns 1.250E+2.
TEMPerature:CONVersion:RESistance
Set
Query
Description
Sets or returns the initial resistance for the temperature
conversion function.
Syntax
Query Syntax
TEMPerature:CONVersion:RESistance {<NRf>[,<String>]}
TEMPerature:CONVersion:RESistance?
Parameter
<NRf>
000.0001~999.9999
<String>
mohm/ohm/kohm/maohm,unit
If the unit is not set, the unit will be
automatically set by the present range.
Return parameter
<NR3>
000.0001~999.9999E± X
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com