GW Instek GOM-804 - Select Measurement Rate

GOM-804 & GOM-805 User Manual
34
Select Measurement Rate
Background
The resistance measurement speed has 2 ranges: slow and
fast. Slow speed is the most accurate with 10
measurements/second. Fast speed has 60
measurements/second. Both have the same measurement
resolution.
The rate selection function is not applicable in Diode
measurement mode. When the PWM drive signal is used
or when the Scan function is activated, the only available
rate setting is fast.
1. Select Rate
Press the
Speed
key to toggle between the Slow and Fast
rates.
Measurement rate
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com