GW Instek GOM-804 - Measurement Settings; Average Function

GOM-804 & GOM-805 User Manual
60
Measurement Settings
Background
The following measurement settings are used to
configure the various measurement modes.
Average Function
Background
The average function smoothes measurements using a
moving average. The average function sets the number of
samples used for the moving average; a higher number
results in smoother measurement results. The average
function is turned off by default.
1. Select Average
setting
From one of the main screens, press
the
ESC
key so that the menu
system at the bottom of the display
has focus.
Go to Meas. Setup and press Enter.
Go to Average and press Enter.
Meas. Setup
menu icon
Move
Select menu
or setting
Enter
2. Average
setting appears
Use the arrow keys to turn Average on and set the
average number. Press Enter to confirm the setting.
Average settings
Average
OFF, ON: 2~10
Note
Pressing ESC before pressing ENTER will exit the Average
function settings.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com