GW Instek GOM-804 - Zeroing (Relative Function)

GOM-804 & GOM-805 User Manual
26
Zeroing (Relative Function)
Background
The Relative function is used to perform a zero
adjustment on the test leads.
After the Relative value is pre-set, each measurement that
is displayed is equal to the actual value minus the relative
preset value.
1. Short the
cables
Short the test cables together as shown in the diagram
below:
SOURCE SENSE SENSE
SOURCE
Source+
/Sense+
Source-
/Sense-
2. Set the
Reference value
Press the
REL
key.
3. Relative mode
display appears
Before REL
After REL
Rel:
Indicates the Relative function is active
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com