GW Instek GOM-804 - Interface

MEASUREMENT
71
Interface
Background
The remote interface can be set to RS232, GPIB or USB.
Note
The GPIB interface is only available on the GOM-804G
and the GOM-805.
1. Select
Interface setting
From one of the main screens, press
the
ESC
key so that the menu
system at the bottom of the display
has focus.
Go to System and press Enter.
Go to Utility and press Enter.
Go to Interface and press Enter.
System
menu icon
Move
Select menu
or setting
Enter
2. Interface
setting appears
Use the arrow keys to choose an interface and to set the
baud rate (RS232) or primary address (GPIB). Press
Enter to confirm the setting.
Interface
Interface
GPIB, Primary Address (1 ~ 30)
RS232, Baud Rate (1200, 2400, 4800,
9600, 19200, 38400, 57600, 115200)
USB
Note
Pressing ESC before pressing ENTER will exit from the
Interface settings.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com