GW Instek GOM-804 - Rear Panel Overview

GETTING STARTED
21
Rear Panel Overview
REMOVE INPUTS BEFORE OPENING.
TO AVOID SHOCK,
WARNING
RS232
SER.NO. LABEL
100 240V , 50 60Hz
25VA MAX
AC
HANDLER / SCAN / EXT I/O
TC SENSOR
GPIB
RS232 portGPIB port Handler/Scan/Ext I/O
USB B
port
Temperature sensor portAC power input
AC Input
100 240V , 50 60Hz
25VA MAX
AC
Accepts the power cord. AC 100 -
240Vac; 50 - 60Hz.
For the power up sequence, see page
24.
RS-232 Port
RS232
Accepts an RS-232C cable for remote
control; DB-9 male connector.
For remote control details, see page 92.
GPIB Port
GPIB
Accepts a GPIB cable for remote
control. See page 93 for details.
USB Device Port
USB device port for remote control.
See page 90 for details.
Handler / Scan /
EXT I/O Port
HANDLER / SCAN / EXT I/O
The Handler / Scan / EXT I/O
port is used to output
pass/fail/high/low comparison
results. This port is also used for
the user-programmable EXT I/O
pins.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com