GOM-804 & GOM-805 User Manual
94
Using Realterm to Establish a Remote Connection
Realterm is a terminal program that can be used to
communicate with a device attached to the serial port of
a PC or via an emulated serial port via USB.
The following instructions apply to version 2.0.0.70.
Even though Realterm is used as an example to establish
a remote connection, any terminal program can be used
that has similar functionality.
Realterm can be downloaded on Sourceforge.net free of
charge.
For more information please see
http://realterm.sourceforge.net/
Download Realterm and install according to the
instructions on the Realterm website.
Connect the GOM-804/805 via USB (page 90) or via
RS232 (page 92).
If using RS232, make note of the configured baud rate.
Go to the Windows device manager and find the COM
port number for the connection.
For example in Windows 7, go to the Start menu >
Control Panel > Hardware and Sound > Device Manager
Double click the Ports icon to reveal the connected serial
port devices and the COM port for each connected
device.
If using USB, the baud rate, stop bit and parity settings
can be viewed by right-clicking connected device and
selecting the Properties option.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
